For Ceramics

The Sentry Xpress version 4 micro processor is packed with features. On ceramic kilns, the controller includes Cone-Fire and 8-segment Ramp-Hold modes to give you amazing flexibility in firing your kiln.

  • Cone-Fire mode fires your clay and glazes to a pyrometric cone. Simply enter the recommended cone number and a firing speed of Fast, Medium, or Slow. Let the controller do the thinking for you.
  • Ramp-Hold mode lets you program custom firings with up to 8 steps, or segments. Fire exotic glazes such as crystallines, or slow the cooling to enhance certain glazes. Enjoy brilliant colors that were once thought impossible in electric firing.
  • Skip Segment skips past a segment during Ramp-Hold firing without having to stop the kiln to reprogram.
  • Hold (soak) maintains a specific temperature in both Cone-Fire and Ramp-Hold modes. Some artists use Hold to increase color saturation of china paints.
  • Add Hold Time during firing in either mode without having to stop the kiln to reprogram.
  • Change Target Temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
  • Program Review lets you check that the program you are about to fire is correct.
  • Temperature Alarm can be programmed to sound when the kiln reaches a specific temperature. Set the alarm to remind yourself to close a vented lid or to check the kiln before the expected shutoff time.
  • Storage Memory Ramp-Hold mode can store 4 programs.
  • Delay can be set to turn on the kiln later to suit your schedule.
  • Temperature Display throughout firing and cooling in your choice of °F or °C
  • Thermocouple Offset adjusts the thermocouple readout.
  • Instruction Manual is written in plain English. This colorful, illustrated manual will guide you through each step.
  • Quick Start Guide shows programming instructions for both firing modes. Place it on the wall near your kiln for easy reference.
  • Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay, temporary power failure during firing, or a broken element.
  • 12-Month Warranty
  • LED Lights show whether you are in program, review, or firing mode.
  • Quick Release Connectors on the back of the controller permit fast removal without tools.

For Glass Fusing and Jewelry

The Sentry Xpress version 4 micro processor is packed with features. On glass and jewelry kilns, the controller includes Single-Speed and 8-segment Ramp-Hold modes.

  • Single-Speed mode is quick and easy for simple firings that need only one speed fired to one temperature. Choose from five speeds, and enter the temperature.
  • Ramp-Hold mode lets you program custom firings with up to 8 steps, or segments. Fire thick, large glass pieces such as bowls and platters. Slow the cooling through the annealing range. Trade firing “recipes” with friends.
  • Skip Segment skips past a segment during Ramp-Hold firing without having to stop the kiln to reprogram.
  • Hold (soak) maintains a specific temperature in both Single-Speed and Ramp-Hold modes. Use hold to give you greater control of the final stage in fusing or slumping.
  • Add Hold Time during firing in either mode without having to stop the kiln to reprogram.
  • Change Target Temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
  • Program Review lets you check that the program you are about to fire is correct.
  • Temperature Alarm can be programmed to sound when the kiln reaches a specific temperature. Set the alarm to remind yourself to check the kiln before the expected shutoff time so that you can watch the glass as it reaches its perfect stage of fusing.
  • Storage Memory Ramp-Hold mode can store 4 programs.
  • Delay can be set to turn on the kiln later to suit your schedule.
  • Temperature Display throughout firing and cooling in your choice of °F or °C
  • Thermocouple Offset adjusts the thermocouple readout.
  • Instruction Manual is written in plain English. This colorful, illustrated manual will guide you through each step.
  • Quick Start Guide shows programming instructions for both firing modes. Place it on the wall near your kiln for easy reference.
  • Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay, temporary power failure during firing, or a broken element.
  • 12-Month Warranty
  • LED Lights show whether you are in program, review, or firing mode.
  • Quick Release Connectors on the back of the controller permit fast removal without tools.

Contact

EMRT LLC dba BigCeramicStore
New Hampshire Location: 12 Commerce Ave
West Lebanon NH 03784
Nevada Location: 50 E. Greg St, Unit 108
Sparks NV 89431

Support form

Information

close X

An error occured

close X
BACK TO TOP