Phone: +1 (855) 994-2233 | Location NH/NV: 9:00 am to 5:00 pm M-F
In Stock and Ready to Ship! Get it while you can!
The 240V Orton VentMaster Kit is considered better than hoods because it improves firing conditions in the kiln while removing essentially all fumes from the kiln room. The VentMaster does not transfer any vibration to your kiln, is capable of venting two kilns at once, and is easy to install.
All VentMasters include the main motor & blower housing, one three foot high-temperature hose, one collector cup, multiple hose clamps, installation instructions and sample cones for test firing. VentMaster motors can be kept on the floor or mounted to the wall. If placement under kiln is obstructed, the collector cup can also be attached to the side of the kiln.
This 240V version comes without a plug. Normally ordered for use with a Paragon AOP (Auxiliary Output Connector), and sometimes people have all 240V outlets in their kiln room.