The Olympic FL5.5E electric kiln is a front-loading commercial model made for high fire loads. The FL5.5E is the second smallest volume model of the FL line and fires to 2,350°F on 240 or 208 volts.
The firing chamber of the FL series is a brick and board combination and is designed to optimize insulation efficiency with low mass.
The FL5.5E comes equipped with a pilot light, breaker box, welded heavy angle iron frame, stainless steel jacket and an electronic controller.
|Degree F ( max )
||4.5" + 1" Fiber
||Single / 3
||240 / 208
||36 (240, Single) / 24 (240, 3) / 40 (208, Single) / 27 (208, 3)
|Recommended breaker (amp)
||50 (Single) / 30 (240, 3) / 40 (208, 3)
||6-50 (Single) / Direct Wire (3)
|Size exterior including stand ( wide x high x deep )
||42 x 63 x 36
|Size interior ( wide x high x deep )
||20 x 24 x 20
|Volume ( cu ft. )
||The FL4.5, 5.5, 8 and 12 standard design will fit through a 36" door (if the kiln door is open 180 degrees).
||Floor elements are standard on FL31, FL36, FL42 and FL53. For other models, please ask for a quote / All models can also be built as "car loading" kiln for an additional 25%. Other custom kilns quoted upon request.
|Shipping weight (lbs.)