The Olympic FL42E electric kiln is a front-loading commercial model made for high fire loads. The F42E is the second largest volume model in the FL line and fires to 2,350°F on 240 or 208 volts.
The firing chamber of the FL series is a brick and board combination and is designed to optimize insulation efficiency with low mass.
The FL42E comes equipped with a pilot light, breaker box, welded heavy angle iron frame, stainless steel jacket and an electronic controller.
|Degree F ( max )
||4.5" + 1" Fiber
||Single / 3
||240 / 208
||160 (240, Single) / 107 (240, 3) / 184 (208, Single) / 123 (208, 3)
|Recommended breaker (amp)
||200 (Single) / 150 (3)
|Size exterior including stand ( wide x high x deep )
||59 x 73 x 75"
|Size interior ( wide x high x deep )
||35 x 45 x 46"
|Volume ( cu ft. )
||Floor elements are standard on FL31, FL36, FL42 and FL53. For other models, please ask for a quote / All models can also be built as "car loading" kiln for an additional 25%. Other custom kilns quoted upon request.
|Shipping weight (lbs.)