Olympic FL17E Kiln

Related Downloads

Quick Overview

The Olympic FL17E electric kiln is a front-loading commercial model made for high fire loads. The F17E is one of the mid-sized volume models in the FL line and fires to 2,350°F on 240 or 208 volts.

The firing chamber of the FL series is a brick and board combination and is designed to optimize insulation efficiency with low mass.

The FL17E comes equipped with a pilot light, breaker box, welded heavy angle iron frame, stainless steel jacket and an electronic controller.

Degree F ( max ) 2,350°F
Cone 10
Firebrick 4.5" + 1" Fiber
Phase Single / 3
Volt 240 / 208
Watt 16,800
Ampere 70 (240, Single) / 47 (240, 3) / 81 (208, Single) / 54 (208, 3)
Recommended breaker (amp) 90 (240, Single) / 60 (240, 3) / 100 (208, Single) / 70 (208, 3)
Receptacle Direct Wire
Size exterior including stand ( wide x high x deep ) 52 x 72 x 50"
Size interior ( wide x high x deep ) 28 x 38 x 28"
Volume ( cu ft. ) 17
Doorway clearance The FL17 and FL20 can be made to fit through a 36" wide door opening upon request. (The interior dimension doesn't change but the insulation is assembled a little differently.)
Shape Square/Rectangle
Note Floor elements are standard on FL31, FL36, FL42 and FL53. For other models, please ask for a quote / All models can also be built as "car loading" kiln for an additional 25%. Other custom kilns quoted upon request.
Shipping Group Truck
Shipping weight (lbs.) 1,415
For Schools Order using a PO & other useful information.


close X

An error occured

close X