Art-No: GROUP-KNOLFL12
Olympic FL12E Kiln
pinterest

Related Downloads

Quick Overview

The Olympic FL12E electric kiln is a front-loading commercial model made for high fire loads. The F12E is one of the mid-sized volume models in the FL line and fires to 2,350°F on 240 or 208 volts.

The firing chamber of the FL series is a brick and board combination and is designed to optimize insulation efficiency with low mass.

The FL12E comes equipped with a pilot light, breaker box, welded heavy angle iron frame, stainless steel jacket and an electronic controller.

Degree F ( max ) 2,350°F
Cone 10
Firebrick 4.5" + 1" Fiber
Phase Single / 3
Volt 240 / 208
Watt 13,440
Ampere 56 (240, Single) / 37 (240, 3) / 65 (208, Single) / 43 (208, 3)
Recommended breaker (amp) 70 (240, Single) / 50 (240, 3) / 80 (208, Single) / 60 (208, 3)
Receptacle Direct Wire
Size exterior including stand ( wide x high x deep ) 58 x 70 x 56"
Size interior ( wide x high x deep ) 24 x 36 x 24"
Volume ( cu ft. ) 12
Doorway clearance The FL4.5, 5.5, 8 and 12 standard design will fit through a 36" door (if the kiln door is open 180 degrees).
Shape Square/Rectangle
Note Floor elements are standard on FL31, FL36, FL42 and FL53. For other models, please ask for a quote / All models can also be built as "car loading" kiln for an additional 25%. Other custom kilns quoted upon request.
Shipping Group Truck
Shipping weight (lbs.) 1210
For Schools Order using a PO & other useful information.

Information

close X

An error occured

close X
BACK TO TOP