Laguna CN304 Moroccan Sand Casting Slip
Quick Overview

Laguna CN304 Moroccan Sand Cone 5 Casting Slip is available in a 1 gallon, 5 gallon, or 50 lb container.

1 and 5 gallon containers come in a pre-mixed liquid, and 50 lb containers come as a dry powder.

Dry slip requires mixing with water and deflocculants such as soda ash, sodium silicate, or dispersal/Darvan to get proper results.

Moroccan Sand Casting Slip is the original Cone 5 stoneware casting slip.

It makes a reliable stoneware slip that can be cast in all standard molds.

It is semi-vitreous, meaning it will absorb between 3% and 7% of its weight in water when submerged, and is therefore only for indoor use.

It is suitable for both gas and electric kilns.

As a general guideline, 50 lbs of dry slip mixes with about 3 gallons of water to make about 5 gallons of slip.

To get the viscosity and specific gravity that you want, you will have to make the solution in the best ratio that works for you.

This slip fires up to cone 5-6.

Abs 3%
Shrinkage 10%
Cone 5-6
Shipping Group Parcel
For Schools Order using a PO & other useful information.


close X

An error occured

close X