Art-No: GROUP-KNSKGM1227-3
Skutt GM1227-3 Glass Kiln
Quick Overview

The Skutt GM1227-3 glass kiln fires to 1,800°F on 240 or 208 volts. It is the largest Skutt production model available.

This GM1227-3 allows for fusing on multiple layers. With Zone Control standard, this model fires each section independently to ensure even firing from the top to bottom.

The kiln is equipped with a type K thermocouple, a lid lifter, porcelain peep plugs and the GlassMaster, an electronic controller that has preset firing modes as well as a ramp/hold mode with up to 8 segment programs.

Now with New Optional Touchscreen Controller With Built-In Wifi! 

You can select the add-on option after you select the kiln.

You can find more information about this new awesome add-on by going to this link:

http://www.bigceramicstore.com/skutt-kilnmaster-touchscreen-controller-with-built-in-wifi.html

Degree F ( max ) 1,800°F
Firebrick 3"
Phase Single / 3
Volt 240 / 208
Watt 11,520 (3 and 240, Single) / 9,980 (208, Single)
Ampere 48 (Single) / 29.3 (240, 3) / 31.7 (208, 3)
Recommended breaker (amp) 60 (Single) / 40 (3)
Receptacle 6-50 (Single) / 15-50 (3)
Size interior ( wide x high x deep ) 28 x 28 x 27"
Volume ( cu ft. ) 9.9
Shipping Group Free (Truck)
Shipping weight (lbs.) 351
Art-No: GROUP-KNSKGM1227-3
Skutt GM1227-3 Glass Kiln
Skutt GM1227-3 Production Glass Fusing Kiln   +$3,239.00
QTY:
Voltage*:
Phase*:
Once you have confirmed the selection(s) above, you are ready to Add To Cart.
Or, choose from the Optional Add-Ons below to enhance your kiln.
Optional Add-Ons
Options
  • Skutt Touchscreen Controller for New KM/GM Kilns   +$319.00
  • Skutt Envirovent 2   +$469.00
  • Skutt EnviroLink - electrical switching device for kiln vents   +$149.00
  • Skutt Easy View control panel mount option (Green for Glass Kins)   +$39.00
  • Furniture kit Shelves: 10 ea 5/8" thick half shelves Posts: 30x 4" posts   +$620.00
  • Half shelf 13" x 26" x 5/8" (12 sided)   +$50.00
For Schools Order using a PO & other useful information.

Information

close X

An error occured

close X
BACK TO TOP