Art-No: GROUP-KNCOBX2322D
ConeArt 2322D SQ Electronic Kiln
Quick Overview

The Cone Art Kilns Model 2322D is top loader comes with all the standard features that set Cone Art apart: heavy duty floor element, double wall design, patented lid lifter system, multi zone control, and over sized swing out control panel. This kiln will easily fire to cone 10 and gives you a full 7 cft of stacking space.

There are heavy-duty Kanthal A-1 elements in the walls and floor.  This makes firing to cone 10 a breeze even with high mass loads.  This kiln is equipped with a counter weight lid lifter   3 Zone Bartlett Controller.

Cone 10
Firebrick Double Walled (consists of the standard 2.5" brick, plus an additional 1" of fiber insulation)
Phase Single / 3
Volt 240 / 208
Watt 11,500
Ampere Single Phase: 55 amp (240 V / 70 amp fuse) or 63 amp (208 V / 80 amp fuse) Three Phase: 31.9 amp (240 V / 40 amp fuse) or 36.3 amp (208 V / 50 amp fuse)
Recommended breaker (amp) 60
Receptacle comes without a plug to adapt to the type of wall outlet you have
Size interior ( hex x deep ) 23" x 23" x 22.5"
Size exterior including stand ( wide x high x deep ) 32" x 32" x 27.5"
Volume ( cu ft. ) 7
Shape Square/Rectangle
Shipping Group Free (Truck)
Shipping weight (lbs.) 350
Art-No: GROUP-KNCOBX2322D
ConeArt 2322D SQ Electronic Kiln
ConeArt 2322D SQ Electronic Kiln   +$3,019.00
QTY:
Voltage*:
Phase*:
Once you have confirmed the selection(s) above, you are ready to Add To Cart.
Or, choose from the Optional Add-Ons below to enhance your kiln.
Optional Add-Ons
Optional Genesis Touch Screen Controller
  • ConeArt Genesis Touch Screen Controller   +$189.00
2322D SQ Furniture Kit
  • ConeArt 2322D SQ Furniture Kit   +$495.00
For Schools Order using a PO & other useful information.

Information

close X

An error occured

close X
BACK TO TOP