Phone: +1 (855) 994-2233 | Location NH/NV: 9:00 am to 5:00 pm M-F
These glazes have a smooth, unique stone-like surface when fired over a Cone 04 bisque.
The ST glaze series flows a little in the firing, settling in the crevices and towards the bottom of a vertical surface. Therefore, when applied over a textured surface they will produce antique-like variations or a weathered and worn out look on the higher relief areas of the piece. Because they move slightly, care should be taken to taper down the glaze application towards the bottom of the piece so that the piece will not stock to the kiln shelf during firing. When applied over red clay, the clay color showing through the high relief contrasts and blends with the glaze color and the entire piece is enriched by the warm undertones.
Best applied over Cone 04 bisque. Recommended firing temperature is Cone 05, however they could be fired lower to Cone 06 or higher to Cone 04 to produce different effects. Do not be afraid to experiment. Can also be used by applying over or under other glazes like the LG series or within their own series. All are AP non-toxic except 23, 25, 40, and 42. None are dinnerware safe because they are more porous than most glazes and could grow bacteria
|Safety label||Some AP / Some CL|