Art-No: KFTHRF306
1.5" Thick Square Kiln Post, 6" Tall
Quick Overview

These medium kiln posts are great for firing up to Cone 6. They can go to Cone 10 depending on how heavily/evenly they are loaded. See note on breakage policy.

The posts on this page are fired to cone 13 during manufacturing. The suggested manufacturers cone rating is conservatively estimated based upon expected (heavy) loads. You'll find the posts will continue to perform well at higher cone under less heavy and more even loading.

NOTE: Kiln posts are fragile. We make every effort to pack them well, but sometimes one will break in shipping. If this happens we will credit you the cost of the post, and we will not ship you a replacement. Since you are likely to break posts as you use them, we recommend that you purchase spares. Small chips which are cosmetic only and do not affect the functionality will not be credited.

Height front-to-back 6''
Cone 6-10*
Shipping Group Parcel
For Schools Order using a PO & other useful information.


close X

An error occured

close X