NorthStar Studio and ClassroomWorktables

These worktables are very strong and can support 600 lbs on each surface, for a total of 1200 pounds.  They can be ordered with or without the bottom shelf.  Several tables can be locked together to create a larger work surface using in-line using spacer kits.  (Furnished at no extra charge.  Please request TGTSK when placing order).

End wing extensions are available with a plain, smooth finish or with a cut-out to hold a five gallon bucket (for mixing glazes).  The Extensions can be folded up against the legs when not in use.  (Max load on extensions is 100 lbs.  24" x 24")

The frame is 16 gauge American steel with North Star's extremely durable, rust-free, scratch-resistant, powder coating finish.  The table top and shelf are made from 3/4" MDF (no formaldehyde) with a high pressure melamine overlay.  
Overall Work Table dimensions are 50" long x 28" wide x 36 1/2" high.  

NorthStar Glaze Mixing Tables table

TABLES:  This very strong Glaze Mixing Table can support 600 pounds on the top.  The frame is 14-gauge American steel with baked-on powder coat finish (which is far tougher than any paint). The top is made of ¾” MDF (no formaldehyde) with a high-pressure melamine overlay.  

BINS:  Each welded aluminum bin holds 100 pounds or more, depending on the density of the material.  Bins simply lift out, but cannot fall out when in use.  The bin supports are guaranteed never to bend, sag or deform under load.  It can be ordered with five bins on one side, or five on each side, for a total of ten.  Bins are 7” wide, 13” front-to back, 16” deep excluding integrated handle.

END WINGS:  End wings (two, one or none) simply fold down against the legs when not in use.  They can be Bucket Wing (as shown, with hole for a standard five-gallon plastic bucket) or Blank Wing (no hole).  In the Bucket Wing, an inset accepts a standard 15” plastic throwing bat (included) to close the hole and yield a smooth, level top when a bucket is not being used.  Both wings measure 24” x 24” x ¾” and can support up to 100 pounds each.

Each table includes one printed sheet of labels for common glaze components
plus sheet of 15 blank labels.  Multiple tables can be locked together end-to-end with no-charge spacer kits (please request when ordering, if needed).

Overall dimensions of the base table: 50” long, 28” wide, 36” high.  Five Year Warranty.  Made in USA.   Shipped fully assembled by truck.