Kiln Furniture, Stilts

Scroll down or click to jump to item:
Triangle Stilts	Bar Stilts	Stilt Kits	Bead Racks	Napkin Ring	Ladle Stilt	Egg Bar	Plate Setters	Tile Holders

All ceramics items on this page are good to Cone 10. The metal rods will begin to deform as you exceed cone 6. Keep that in mind that if you put a lot of weight on metal pins or rods. Try to stilt pieces so the weight is spread out evenly, minimizing or eliminating this effect. Also, many clays will deform as they approach Cone 10, so your piece may deform around the stilt/rod. Again, stilt your items evenly and in multiple locations to avoid this.

Triangle Firing Stilts with Metal Wires

Steel point stilts are designed to reduce stilt marks by the use of fine steel points to support the ware.
Buy 10 "A" Stilts, take 10% off, or 20 and take 15% off.
Buy 10 "B" Stilts, take 10% off, or 20 and take 15% off.

Roselli Stilt	Size point to point	Cost
A00	3/8"	$0.64
A0	1/2"	$0.66
A 1/2	3/4"	$0.71
A1	7/8"	$0.79
A2	1 1/4"	$0.89
A4	1 5/8"	$1.09
A6	2 1/4"	$1.25
A8	2 3/4"	$1.42
A10	3 5/8"	$1.58
Size x No. of wires	Size point to point
B2x9	1 1/4"	$1.29
B4x6	1 1/2"	$1.29
B6x12	2 1/4"	$1.69
B10x15	3 1/2"	$1.99

Same base as the A Series. Has 3 removable rods of heavy nichrome wire. Ideal for stilting vases, bottles, eggs and doll parts.
Buy 10 "H" Stilts, take 15% off.

H8	3" point to point	$4.98
H10	4" point to point	$6.89

C Series Bar Firing Stilts with Metal Wires

Steel point stilts are designed to reduce stilt marks by the use of fine steel points to support the ware. Good for firing small Xmas trees, etc.

Roselli Stilt	Size point to point	Cost
12 x 6	4 1/4"	$3.22
12 x 15	4 1/4"	$3.91

D Series Bar Firing Stilts with Metal Wires

Steel point stilts are designed to reduce stilt marks by the use of fine steel points to support the ware. Staggered points on 5B allows it to support the heaviest ware. 4B-20 has 20 points close together all in a row.
Buy 10 "D" Stilts, take 10% off. or buy 20 and take 15% off.

Top is 2B
Middle is 3B
Bottom is 5B

Roselli Stilt	Length	# pins	Cost
2B	2"	5	$1.05
3B	3 1/4"	10	$1.58
4B	4"	10	$1.66
5B	3 1/2"	9	$1.83
4B-20	4"	20	$2.16

E Series Bar Firing Stilts with Metal Wires

Used for vases, bottles, salt and pepper shakers, etc. Rod in 10S is removable.

Roselli Stilt	Rod Height	Base Width	Cost
2S	1 1/2"	1 3/4"	$1.83
6S	2 1/2"	3"	$3.20
10S	6"	4"	$4.16

Stilt Kits

Not exactly sure what to get? How about a kit? You get a variety of stilting pieces to get you started.

Kit Size - Contains

Cost

Small 32 Piece Kit (click for picture)

	3 each of #A00, A0, A1, A2, A4, A6, 3B and 4B
	1 each of #A8, A10, B2x9, B4x6, B6x12, 6S and 6H, E2S (pictured as 2S below)

$47 Sale 20% off

Large 60 Piece Kit (click for picture)

	6 each of #0, #1, #2, #4, #6, 3B, and 4B
	3 each of #8 and #10
	2 each of B2x9, B4x6, B6x12, and 6H
	1 each of B10x15, B12x15, B14x9, and E2S (pictured 2S above)

$89 Sale 20% off

Small Bead Rack

Set of 2, Length 5", Height 2", Rods 6" long (1/8" dia.)
Setter for beads, buttons, trinkets, etc.

Bead Rack & 4 rods

$14.99

4 extra 6" Rods

$8.89

Large Bead Rack

Two durable stoneware supports with 10" long rods (1/8" dia.) provides a versatile, space-saving device for firing macramé beads and other larger hanging objects. The heavy gauge wires can be staggered to accommodate any size object. Includes 7 rods. Each support is 8 1/16" high and the triangles are 4" wide at the base that narrow to a wire holder at the top.

Large Bead Rack & 7 rods

$32

Extra Rods, set of 7

$28

Vertical Bead Tree

Designed not only for the potter but also the jewelry maker, this new concept uses shorter lengths of wire to eliminate sagging. Sagging can occur with longer rods, allowing small objects to touch and stick together. 5"h x5"w.

Vertical Bead Tree & 12 rods

$15.50

Replacement rods (12)

$6.50

Ladle Stilt

Base Length 3 1/2". High point 1 3/4" from base. Low point 3/4" from base. Fits most sizes of ladles and spoons. Cone 10

$4.79

Napkin Ring Holder

Consisting of a Roselli peep hold plug and a 18 pin No. 12 triangle stilt with a center hole. The napkin ring holder is well suited for supporting many large circular objects (like bracelets) from the inside diameter.

Napkin Ring Holder

$11

Egg Bar

Egg Bar with 4 porcelain rods. Economical and space-saving device can stilt four objects (e.g. eggs, etc) at a time. each egg bar includes two 6" and two 4" porcelain rods (3/8" diameter). Porcelain rods will not bend like wire. Cone 10.

Egg Bar with 4 porcelain rods

$11

Special Egg Bar

Special Egg Bar with 4 nichrome rods. Base is 10.25" long (1.5 wide) and has 7 holes with porcelain inserts to hold nichrome rods. Each bar has two 4" and two 6" nichrome rods. May be used for eggs, figurines, doll parts, etc.

Special Egg Bar with 4 nichrome rods.

$15.69

Plate Setters

Plate setter enables the potter to fire from 1 to 6 plates in a stacking arrangement. Space saving feature means using only as many as needed. Strong, study and easy to use. A set of 3 supports one plate. Buy 10 sets, take 15% off.

Set of 3

$7.25

Stacking Tile Holders

Sold individually. Cone 10 Buy 100, get 20% off.

Stacking Tile Holders.
7/8" high. 1 7/8" long. Accommodates a tile 1/4" thick.
Each corner sold separately. Buy 4 for each tile. The manufacturer recommends stacking no higher than 6 tiles high.

$1.59
each

Tile Holders

Multi-shelf tile setters help economize on space, but allow air to circulate around tiles for even heating. Permit faster firing. Help reduce warping and twisting problems. One piece setter is easy to handle. For use to Cone 10 . Shelf space - 5/8". Recommended maximum tile thickness 1/2"

Holds 22 4 1/2" tiles in 2 columns. 11" H x 10 1/2" W x 5" D. 15 lbs	$41
Holds 9 6" tiles (1 column) 10" H x 7.625" W x 6.375" D. 13 lbs	$39
Holds 8 8" tiles (1 column) 10.25" H x 9.5" W x 8" D. 16 lbs	$46