|
15% off Liquid Glazes.
15-20% off Plaster Molds. 15-20% off Decorating Items
Skutt Kiln and Wheel Prices go up 2/1! See
all Sale
Items! |
 |
MARX
Magic Mender
For ceramic greenware or bisque. Add-on and fix broken pieces. Fix
hairline cracks. (Apply directly from jar.)
 | 4 oz jar, low fire |
|
$4.95
|
|
|
 |
MARX
AZTEC
High-Fire Mender
For porcelain, stoneware, pottery and
sculpture. Directions: Fill to ridge above label with any
high fire slip or clay and stir well. Apply with brush to
greenware or bisque. Let dry, clean, and fire.
| 18.9 grams, which yields 2 oz when your slip or clay is
added. |
|
$4.95
|
|
|
Stoneware and porcelain shown |
APT II Menders
Attach and mend greenware add-ons and broken bisqueware. Good for
stress cracks on finished glazed pieces. In decorating it
facilitates decal and slip application, bonding of air brushed colors,
and second glaze applications. Instructions
& use
More information on APT II products: http://www.apt2products.com/
| 2 oz, Ceramic Enhancer
for low fire clay |
|
$5
|
|
| 2 oz, for stoneware
and porcelain |
|
$5.75
|
|
| Mend-a-Mold 1 oz, for plaster molds |
|
$4
|
|
|
 |
Duncan
Patch-A-Tatch
Clay cement for joining attachments. Mends broken greenware or
bisque. How to use...
1. Gently scratch crisscross lines on areas to be
joined.
2. Using a soft brush, moisten scored areas or broken edges with water.
Use the same brush to apply a good coat of Patch-A-Tatch to these areas.
3. Quickly attach or fit the pieces together and hold securely for a few
seconds.
4. Brush a little Patch-A-Tatch over the joint and, when set and
thoroughly dry, scrape, sand, sponge or otherwise finish, and the piece
is ready for decorating or firing.
5. Clean up with water.
| SY545 4 oz jar |
|
$4.00
|
|
|
Texturizers: Lead Free
|
Sample of texturizer on bottles |
|
High
Fire
TH-1 is a rutile base texturizer. In superposition
with other glazes it tends to produce a yellowish/orange
crystal-type texture. It will yield excellent results with
most AMACO HF Series glazes, or
other glazes which are fired at Cone 4-6, when applied over or
under the glazes. As results vary from glaze to glaze, be
sure to fire a test sample first |
Low
Fire
Apply TL-1 Texturizer over any Cone 06-05 glaze to create
different textures. Surface textures vary depending on the
type of base glaze (gloss, matte, or textured), increasing the
glaze palette tremendously. An even wider variety of effects
can be achieved by applying TL-1 between coats of two different
glazes. |
|
Amaco High Fire Texturizer TH1 - Wet (pint) |
|
|
$8.95 |
|
|
|
Amaco Low Fire Texturizer TL1 - Wet (pint) |
|
|
$10.95
|
|
|
|
 |
CMC Gum,
pint
A
liquefied binder, thickener, suspension and brushing medium agent made
of an organic celluose gum. Also used to increase plasticity of
clay bodies. (Liquid form is best for adding to liquid glazes) |
$6.00
|
|
| CMC, 1 pound dry |
Used
to improve brushability of glazes (dry better for adding to dry glazes
before mixing), see above |
$17
|
|
| Laguna Brushing
Medium, 1 pound dry |
Used
to improve brushability of glazes, see above |
$15
|
|
 |
Sodium
Silicate, pint
Liquid
"N" brand Sodium Silicate is used as a major deflucculant in
preparing slip. It reduces the amount of water needed, therefore
reducing shrinkage. This is a pure sodium silicate and must be
mixed with water to a 50/50 solution for most casting bodies. |
$5.50
|
|
 |
Darvan 7,
pint
A
deflocculant that is user friendly because it has a wide
deflocculation curve. Does not deteriorate molds as actively as
sodium silicate. |
$8
|
|
Spectrum Brushing Media
-1070:
Gum solution that can
be added to any glaze or underglaze to improve brushing
characteristics. Lengthens the drying time after the glaze
is brushed on, and assists in glaze suspension. Can be
used to convert a dipping or spraying glaze into a brushing
glaze. A rough guideline is to add 5-10% of the glaze
volume.
|
| 1 pint
Brushing Medium |
| $7.00
|
|
| 1 gallon Brushing Medium |
| $22.00
|
|
Spectrum Glaze Suspender - 1071:
Solution of
Bentonite in
water, used to help suspend glazes that are settling out.
Amount to use varies widely; rough guideline is 5-10% of the
glaze volume. Keep in mind that the more you add, the
thicker or more viscous a glaze will become.
|
| 1 pint
Glaze Suspender |
| $5.00
|
|
| 1 gallon Glaze Suspender |
| $15.00
|
|
Spectrum Glaze Thinner - 1072:
It is quite powerful
so use sparingly. Use 2 to 3 drops per 4 oz of glaze.
|
| 1 pint Glaze Thinner |
| $5.00
|
|
| 1 gallon Glaze Thinner |
| $15.00
|
|
E6000 Adhesive
Works great for attaching tiles, or pieces of ceramic to each
other. For interior use as it does not hold up to UV. |
|
|
E6000 Adhesive:
A tough, flexible and highly versatile rubber-based
compound that exhibit exceptional adhesive, contact adhesive and sealant
qualities. Works on wood, glass, metal, fiberglass, ceramics, etc.
Dries clear, and is paint-able and waterproof.
Begins setting 10 minutes; maximum strength in 24-72 hrs. 3.7 fl oz
(about the same volume as a normal tube of toothpaste)
More info from the
manufacturer |
$5.95
|
|
|
