Anneal large glass figurines in the digital F120 lamp working kiln.
The F-series lid elements use a new element groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The element is mounted in the top of the kiln for safety. There is no sidewall element to touch with a punty rod. With the element in the top, you can also fuse and slump glass. The F120 comes standard equipped with a stand.
The F120 allows you to maintain the annealing temperature indefinitely with the Sentry Xpress 3-key electronic controller
|Degree F ( max )
|Recommended breaker (amp)
|Size interior ( wide x high x deep )
||10.75 x 7 x 11"
|Size exterior including stand ( wide x high x deep )
||20.5 x 20 x 23"
|Volume ( cu ft. )
|Shipping weight (lbs.)