Art-No: GROUP-KNPGCAL
Paragon Caldera Digital Kiln

Related Downloads

Quick Overview

The Paragon Caldera electric kiln fires to 2,350°F on 120 volts, and is made for firing silver clay, china, ceramics, and glass.

The Caldera's separate, stackable top and bottom are completely portable.  This digital model features the Sentry Xpress controller, which fires up to 8 segments in ramp-hold mode.  You can control both heating and cooling with a simple 3-key operation.  

No kiln stand. Four 2” x 2” x 2” firebrick blocks included with each kiln, to be placed under the kiln during firing.

Degree F ( max ) 2,350°F
Degree F with collar 2,000°F
Firebrick 2.5"
Volt 120
Watt 1,680
Ampere 14
Recommended breaker (amp) 15
Receptacle 5-15
Size interior ( wide x high x deep ) 8 x 6.75 x 8"
Size exterior including stand ( wide x high x deep ) 13 x 13.75 x 19.5"
Volume ( cu ft. ) 0.25
Shape Square/Rectangle
Note Add 4.5" of height with a blank or bead collar. The special BC collar has a 7.5" x 2" door on the side for annealing glass beads. This goes between the kiln and kiln bottom.
Shipping Group Free (Parcel)
Shipping weight (lbs.) 46
Art-No: GROUP-KNPGCAL
Paragon Caldera Digital Kiln
Once you have confirmed the selection(s) above, you are ready to Add To Cart.
Or, choose from the Optional Add-Ons below to enhance your kiln.
For Schools Order using a PO & other useful information.

Information

close X

An error occured

close X
BACK TO TOP