|

Paasche Hobby Shop Spray Booth: HSSB-22-16
Rugged, compact in size and easy to assemble. This portable booth features galvanized metal for easy
cleaning and durability. Perfect for all you hobby and craft spraying. 4" dryer hose hook-up is supplied for exhausting your fumes.
Overall dimensions are
20" wide, 20" deep, and 18.5" tall
This product is intended for use with water based or non flammable paint.
Working dimensions are 22" side x 16" high. Provides approximately 235 CFM air movement, 120
Volts, 60 Hz Product manual
Uses
a carbon and fiberglass filter system. Will remove larger
particles but WILL NOT REMOVE ALL HAZARDOUS MATERIALS FROM THE
AIR. Best for spraying non-toxic glazes. You should vent to
the outside, and wear goggles and a protective mask.
 | Paasche Hobby Shop Spray Booth HSSB-22-16 (USA Ground ship only
$40) List Price $325 |
|
$245
|
|
 | Replacement charcoal filters |
|
$6
|
|
 | Replacement polyester filters |
|
$2
|
|
|

Paasche Hobby Shop Spray Booth: HSSB-30-16
This Deluxe Spray booth is 8" wider than the standard model and comes with two fan units for twice the CFM.
The fans are separate so one or both units can be run while using the booth. Both fans come with a fiberglass filter and carbon filter for double
filtration. 4" dryer hose hook-ups are supplied for exhausting your fumes. Overall dimensions
are 30" wide, 20" deep, and 18.5" tall
This product is intended for use with water based or non flammable paint.
Working dimensions are 22" side x 16" high. Provides approximately 470 CFM air movement, 120
Volts, 60 Hz, Product manual
Uses
a carbon and fiberglass filter system. Will remove larger
particles but WILL NOT REMOVE ALL HAZARDOUS MATERIALS FROM THE
AIR. Best for spraying non-toxic glazes. You should vent to
the outside, and wear goggles and a protective mask.
 | Paasche Hobby Shop Spray Booth HSSB-30-16 (USA Ground ship only $50) List Price
$535 |
|
$399
|
|
 | Replacement charcoal filters |
|
$6
|
|
 | Replacement polyester filters |
|
$2
|
|
|

Paasche FABSF Filter Shelf Spray Booth
Features
18 gauge galvanized steel panels with flanged edges. Filter
sections include AG-Fiber Glass Filters which an be quickly and
inexpensively replaced when necessary. These filter cells prevent
over spray from being exhausted to the outside atmosphere and
accumulating on the fan and exhaust piping.
An extra set of
AG-Fiber Glass Filters are supplied with each booth. Will
accommodate top or back exhaust, and are available in many other sizes.
The 4' size is the most popular for spraying glazes. Is 7'
high, comes with extra set of filters, draft gauge and belt guard.
240v 3 phase motor is standard. Others are available.
Standard Features
Working Dim: 4' W x 3' D x 4'6" H
Overall Dim: 4'4" W x 5'2" D x 7'2" H
- 18" Fan with sparkles aluminum blade
- Belt guard for fan
- 1/3 HP, 3ph, 208/230/460 volt motor
- 2560 CFM at 1/4" static pressure
- (1) Fluorescent light - 2 Tube, Vapor Tight,
Class 1 Div 2. (tubes not included)
- Two sets of filters
- Manometer Draft Gauge included
- Full assembly drawing and instructions
- All hardware |
Options (inquire when
ordering)
|
 | Paasche FABSF-4' List Price $1895
(4'W x 3'D x
4'6"H) |
|
$1799 + $200 ship in lower 48 states
|
|
|
|