Models on this page:
FireFly: 8" x 8" x
4.5" deep, 0.16 cu ft, 2350 deg F
Caldera Top Load: 8" x 8" x 6.75" deep
(0.25 cu ft), plus optional bead collar.
New! Caldera
XL: 7.5" x 7.5" x 9" deep (0.29 cu ft)
SC Series Front Load: Inexpensive electronic
digital models, 2000 F
Home Artist Kiln: 12" diameter x 12"
deep, 0.78 cubic feet
S11-9-3: 11" diameter x 9" deep, 0.56
cubic feet, 2300 degrees F (Cone 9)
X14J Top Load: 14.5" diameter x 7" deep, 0.69 cubic
feet, 1700 degrees F
QuickFire6: Fiber Shell, 6" x6" x 6" deep (0.125
cubic feet)
Blue Bird, XL and JR: Bead annealing kilns
Q and E Series Front Load:
0.14-0.53 cubic feet
J Series Fiber Front Load: 13" wide x 9" high x
13" deep, 0.88 cubic feet
Paragon Xpress E14A
F120/F130 Annealing Kilns |
Paragon FireFly
Best prices and FREE Shipping! Fly
The new FireFly Multi-Purpose portable kiln. It plugs in almost anywhere on a household
120 volt outlet. Fire glass, silver clay (PMC), china and ceramics.
Create glass
bracelets and pendants, as well as small glass casting molds, and even drop molds.
You can also fire porcelain or stoneware
pendants and beads, and test glazes as well.
The Paragon FireFly is an excellent choice for beginners.
It
fires rapidly so you can fuse glass in minutes. Or slow down
firing with the infinite control switch. Watch the kiln
temperature on the hand-held, easy-to-read digital
pyrometer. The pyrometer measures in degrees F up to 1999F.
(Please note: If you fire
hotter than 1999 F, you will need a pyrometer that reads higher
temperatures.)
Rugged construction makes this kiln a
little workhorse. The hinged lid is self-adjusting to compensate for expansion
at high temperatures. A built-in 3” tall steel base with mar-proof rubber feet
supports the entire firebrick bottom. Place the kiln directly
onto a heat-resistant work surface. No extra stand is needed. |
|
| Model |
Type Read
about kiln controls |
List Price |
Our Price |
|
| FireFly |
FireFly Kiln (Manual firing with Digital Pyrometer
for temperature readout) |
$480 |
$399 + Free Ship |
|
| FireFly with Window |
FireFly Kiln (Manual firing with Digital Pyrometer
for temperature readout) with 2"x2" window in lid
new! (click for image) |
$520 |
$429 + Free Ship |
|
| FireFly E |
FireFly Kiln with 3
Key Electronic Controller
new!
|
$700 |
$554 + Free Ship |
|
| FireFly E with Window |
FireFly Kiln with 3
Key Electronic Controller and 2"x2" window in lid
|
$740 |
$583 + Free Ship |
|
| Ceramic Fireclay
Shelf. Recommended for Glass and Ceramics. 7" x 7" |
$17 |
$17 |
|
| Shelf kit |
1x c-7 Kiln shelf (7"x7"x5/8"
thick), 4x 2" posts and 1 lb glass separator |
$24 |
$24 |
|
| Upgrade your existing
FireFly to add a window by replacing the whole lid with a window one |
$145 |
$145 + Free Ship |
|
|
|
Paragon Caldera Best
prices and FREE Shipping!
The Caldera Multi-Purpose portable kiln. Fire silver clay,
china, ceramics and glass. Fire rapidly on 120 volts. With a
separate top and bottom, they are stackable and completely
portable. Digital version comes with the Sentry Xpress controller
which fires up to 8 segments in ramp-hold mode. You can control both heating and cooling with
simple 3 key operation.
(No kiln stand.
Four 2” x 2” x 2” firebrick blocks included with each
kiln, to be placed under the kiln during firing)
|
|
| Model |
Type |
List Price |
Our Price |
|
| Caldera |
Caldera kiln, 3
Key Electronic controller Read
about kiln controls |
$780 |
$612 + Free Ship |
|
| Caldera with Window |
Caldera kiln, 3-Key
Electronic controller with 2"x2" window in lid
new! Read
about kiln controls |
$820 |
$636 + Free Ship |
|
| Caldera-S |
Caldera kiln, manual model with infinite control
switch and pyrometer (Click here for
image) Read about kiln controls |
$530 |
$436 + Free Ship |
|
| Caldera-S with Window |
Caldera kiln, manual model with infinite control
switch and pyrometer and 2x2 window in lid (Click here for
image) Read about kiln controls |
$570 |
$466 + Free Ship |
|
| Caldera-XC |
Collar, Plain |
$120 |
$114 |
|
| Caldera-BC |
Collar, Bead |
$150 |
$136 |
|
| Caldera-EC |
Collar, Enameling (image)
Adds 6 3/4” of height to the kiln and a 7½” x 4” door on the side (for copper enameling). Kiln is
limited to 1800 F with this collar |
$165 |
$148 |
|
| Ceramic Fireclay
Shelf. Recommended for Glass and Ceramics. 7" x 7" |
$17 |
$17 |
|
| Shelf kit |
1x c-7 Kiln shelf (7"x7"x5/8"
thick), 4x 2" posts and 1 lb glass separator |
$24 |
$24 |
|
| Deluxe Shelf kit |
Everything you need for maximizing use of your
kiln. Fire 3 layers of short items such as jewelry
pieces
3 shelves (7"x7"x5/8"
thick), 4x 2" posts, 4x 1" posts, and 1 lb glass separator |
$68 |
$60 |
|
|
|
| Model |
Type |
List Price |
Our Price |
|
| CalderaXL |
Caldera XL kiln, 3-Key
Electronic controller Read
about kiln controls |
$905 |
$719 + Free Ship |
|
| CalderaXL with Window |
Caldera XL kiln, 3-Key
Electronic controller with 2"x2" window in lid
new! Read
about kiln controls |
$945 |
$759 + Free Ship |
|
| CalderaXL-KS |
Caldera XL kiln with Kiln Sitter Read about kiln controls |
$795 |
$649 + Free Ship |
|
| CalderaXL-KS with Window |
Caldera XL kiln with Kiln
Sitter, and 2x2 window in lid
Read about kiln controls |
$835 |
$689 + Free Ship |
|
| Deluxe Shelf kit |
Everything you need for maximizing use of your
kiln. Fire 3 layers of short items such as jewelry
pieces
3 shelves (7"x7"x5/8"
thick), 4x 2" posts, 4x 1" posts, and 1 lb glass separator |
$68 |
$62 |
|
| Caldera XL Shelf kit |
2x C-7 Kiln shelf (7"x7"x5/8"
thick), 4x 1", 3" and 5" posts and 1 lb kiln wash
(also fits regular Caldera and Firefly models) |
$50 |
$50 |
|
| Ceramic Fireclay
Shelf. Recommended for Glass and Ceramics. 7" x 7" |
$17 |
$17 |
|
|
|
Paragon SC Series Kilns
Best
prices and FREE Shipping!
The digital SC series kilns fire silver clay, decals, china
paint, enameling, glass and ceramic jewelry in minutes to
2000F. The SC series are astonishingly priced for digital
kilns. They fire automatically at the rate and temperature
you enter. A large, brightly lit display prompts for
firing rate, temperature and hold time. All models use a simple,
three key control pad and fires in single segment, which means
one firing speed, to one temperature and one hold time, or two
segment Ramp-Hold. The last firing stays in memory for easy
repeat firing.
|
SC2 (click links below for photos of models with
windows and bead doors)
|
Use the hold to soak clay silver, clay
gold, or other materials to their recommended times.
Whether ten minutes or several hours, hold is automatic, so you
can make jewelry instead of watching a pyrometer.
Each SC
series kiln includes a 1/4" thick ceramic fiber
shelf. Both models heat from the two sides and back, and
both include a top vent for lost wax casting (and a peep hole
plug to fill it when not needed.). The outer steel
cases remain cool. Convenient on/off switch on the cord.
Ceramic Fiber shelf included. If firing glass or ceramics,
a fireclay shelf is recommended (see below).
The new digital SC-1 kiln fires
PMC, Art Clay Silver, decals, china paint, and glass up to 2000°F.
The SC-1 is smaller than the SC-2 and therefore very convenient
as a traveling kiln. Take the SC-1 to seminars and set it up in
just minutes. This may be the kiln of choice for those silver
clay artists who have limited work space or who make only a few
PMC or Art Clay Silver pieces per session. Fire them without
wasting the space of a larger kiln.
|
|
<-- All models of SC2 and SC3 are usually in stock |
Paragon
Home Artist Kiln Ships UPS!
This new kiln is designed for the home crafter or beginner
ceramist. It is great for hand painting ceramic tiles,
bisque painting, china painting, decals, etc. If you plan
high usage, this probably isn't the kiln, as the elements are not
as easy to change as on normal kilns. Advantages are that it
plugs into normal house wiring, ships UPS, has a built-in luggage carrier
that snaps upright for easy moving, and a simple electronic
controller.
Add to your cart to get shipping rate.
|
 | 120V, 15 amp, 1800 watts |
|
Click
for
alternate image
|
| 2000 degrees F (Recommended for use up
to Cone 06) (note) |
|
|
|
| 12" diameter x 12" Deep
(inside)
18.75" tall x 23" deep x 16" wide (exterior) |
|
|
120v, 15 amp outlet (NEMA 5-15R) |
|
| .78 cubic feet |
|
| Kiln weight 48 lbs.
Ships by UPS. |
|
| Model |
Type |
List Price |
Our Price |
|
| Home Artist Kiln |
Electronic kiln with Read
about kiln controls |
$1085 |
$960 + Free Ship |
|
| Home Artist Kiln |
Electronic Kiln with Furniture Kit
(3 each
1", 3", 6" long posts, 2- 10" round x 1/2" thick
shelves, 3 triangular stilts, 1 each: 3x3, 6x3, 10x3, 1 lb bag kiln wash,
1 hail brush, Box of 6 -6 self supporting Orton cones) |
$1135 |
$999 + Free Ship |
|
| Home Artist Kiln - Raku Version |
Electronic kiln and Optional Lid Cutoff Switch
|
$1155 |
$1017 + Free Ship |
|
| Home Artist Kiln - Raku Version |
Electronic kiln with
Furniture Kit (see above)
and Optional Lid Cutoff Switch
|
$1205 |
$1059 + Free Ship |
|
|
<-- Home Artist Kiln is in stock |
| Model |
Type |
List Price |
Our Price |
|
| X14J |
Manual with infinite switches Read
about kiln controls |
$535 |
$484 + free ship |
|
| Pyrometer |
Paragon T2 Pyrometer (to measure temperature),
analog with needle indicator, good to 2400F (If you prefer a
digital pyrometer, click here) |
$160 |
$140
|
|
| X14JFK |
Furniture Kit (1 13" full and 1
13" half shelf x 1/2" thick; 3 each posts 1", 2",
3", 1" wide, 1 lb kiln wash) |
$54 |
|
| Model |
Type |
List Price |
Our Price |
|
| QuickFire 6 |
QuickFire 6 with furniture kit (includes 2 5"x5"
shelves, 1 lb bag glass separator, 1 Haik brush) |
$380 |
$339 + free ship |
|
| PCB1 |
Optional Power Control Box has an infinite switch
that allows the kiln to be fired slower by cycling the element on and off. |
$85 |
$80 |
|
| Extra Furniture Kit |
Extra Furniture Kit
(You can make
projects faster by preparing your next project on a spare shelf while one
is firing. Let the piece cool slowly on the shelf it was fired
on) |
$27 |
$27 |
|
|
<-- QF6 in stock |
Paragon BlueBird and
BlueBird XL Annealing Kiln
It is a digital front-loading kilns designed for annealing
glass beads and figurines to relieve
stress during cooling.
8-segment Sentry Sentry
Xpress digital controller is standard.
The rugged steel case is light
weight, portable, with a slotted base and louvered switch box
for long life of the electrical system. Both models plug
into a standard household outlet.
The element is in the roof and seated in pin-less grooves.
Blue Bird: Two 10” wide x 2 3/4”
doors.
Interior 5” deep, 20” wide, and 5”
high with a firebrick roof and ceramic fiber walls and floor.
The element is in the roof and seated in pin-less grooves.
Blue Bird XL: Wider Bead Door Two 10” wide x 4 1/2”
doors.
Larger interior: It is 9” deep, 20” wide, and
4 1/2”
high. Firebrick interior on the roof, walls and floor. (Read
about the door configuration.)
And now, the new Blue Bird Jr. For when maximum
portability is desired (only 33 pounds).
|
|
Paragon Q11A, E9AX, E10A,
E12A, E14A
Front Load Kilns
Front Load kilns popular for glass sculpture, glass bead
annealing and glass crucible work. TnF or Xpress
electronic models are preferred for silver clay since the silver
requires a temperature hold. Unlatch and open the door
with one hand. Base stays cool during operation and no
stand is needed. Easy to replace elements. All
models include a door vent hole with steel cover. The
E and Q do not have elements in the lid.
|
| Q11A : 120V, 12 amp,
1440 watts
E9AX : 120V, 11 amp, 1310 watts
E10A : 120V, 15 amp, 1800 watts
E12A : 120V, 15 amp, 1800
watts
E12T : 120V, 19 amp, 2280
watts
E14A : 240V, 13 amp, 3120 watts |
|
Xpress-Q-11
Xpress-E-9A
E-9AX Manual Control
Xpress-E-10
Xpress-E-12
Xpress-E-12T
|
| Q11A : 2300 degrees (Hot
enough for ceramics!)
E9AX: 2000 degrees (new, hotter temp)
E10A : 2000 degrees
E12A : 2250 degrees
(Hot enough for ceramics!)
E12T : 2000 degrees
(new, hotter temp)
E14A : 2000 degrees
- Note, if you want to go to higher temperatures, please
specify E14A-2400 in the notes and we will verify that the
high temp model is still available. |
|
| Q11A : 6" w
x 6.25" h x 6" deep (inside)
(0.14 cubic feet)
E9AX : 8.5" w x 4.25" h x
9" deep (inside)
(0.2 cubic feet)
E10A : 8.5" w x 8.75" h x
9" deep (inside)
(0.39 cubic feet)
E12A : 8.5" w
x 6.00" h x 12" deep (inside)
(0.35 cubic feet)
E12T : 8.5" w
x 9.00" h x 12" deep (inside)
(0.53 cubic feet)
E14A : 13" w
x 8.75" h x 13.5" deep (inside)
(0.88 cubic feet) |
|
| Q11A, E9AX, E10A, E12A have NEMA
5-15R
plugs (standard 3
prong 120v wall
plug)
|
| E12T is NEMA 5-20R
|
| E14A is NEMA
6-20R |
|
5-15
5-20
 6-20
|
| Weight
Q11A : 38 lbs
E9AX : 48 lbs (XPress 55 lbs)
E10A : 90 lb
E12A : 70 lb
E12T : 81 lb
E14A : 131 lb |
| All models ship by UPS/FedEx except
E14A which ships by Truck |
| Now Improved! Many of these
kilns now have the infinite switch
mounted on a sloped front base. Paragon also added an analog
pyrometer in the sloped base next to the infinite switch.
These changes are at no extra charge! |
|
|
| Model |
Type |
List Price |
Our Price |
|
| Q11A |
Q11A with Infinite Switch and Pyrometer (SHIPS
UPS) (see image) Read
about kiln controls |
$535 |
$439 + free ship |
|
| Xpress-Q-11 |
Q11A with Xpress 3 key electronic controller
(SHIPS UPS,) Read
about kiln controls |
$770 |
$609 + free ship |
|
| Furniture Kit for
Xpress/Q11A
(1x 5"x5" shelf, 4x 2" long posts, 1 lb bag kiln wash) |
$20 |
$20 |
|
| Single Shelf for Xpress/Q11A
(5"x5") |
$13 |
$13 |
|
| ---------------------------- |
| E9AX |
E9A with Infinite Switch and
Pyrometer (SHIPS UPS) Read
about kiln controls |
$645 |
$529 + free ship |
|
| Xpress-E9A |
E9A with Xpress 3 key
electronic controller (SHIPS UPS) Read
about kiln controls |
$835 |
$669 + free ship |
|
| E10A |
E10A with Infinite Controls and Pyrometer
(SHIPS UPS) (see
image) |
$840 |
$679 + free ship |
|
| Xpress-E10 |
E10 with Xpress 3 key electronic controller (SHIPS
UPS) |
$1025 |
$809
+ free ship |
|
| TnF-E10 |
E10 with TnF 12 key electronic controller (SHIPS
Truck) |
$1205 |
$1119 + free ship |
|
| Furniture kit for E9
and E10 (1x 7"x7" shelf, 4x 1/2" posts, 1 lb bag
glass separator) (This is the same kit as the Caldera) |
$25 |
$25 |
|
| Single Shelf (7" x 7") |
$17 |
$17 |
|
| ---------------------------- |
| Xpress-E12 |
E12 with Xpress 3 key electronic controller (SHIPS
UPS) (see alt image) Same as Xpress-E12A
price includes lid switch |
$995 |
$789 + free ship |
|
| Xpress-E12T |
E12T with Xpress 3 key electronic controller (SHIPS
UPS) (see alt
image)
price includes lid switch |
$1095 |
$869 + free ship |
|
| Furniture Kit for E12
models (1x 11"x7.5" shelf, 4x 1/2" posts, 1 lb bag
glass separator) |
$50 |
$50 |
|
| Single Shelf (11" x 7.5"
x 5/8") |
$38 |
$38 |
|
| ---------------------------- |
| E14A |
E14A with Infinite Controls and Pyrometer
(SHIPS Truck) (see
image) |
$1040 |
$999 + free ship |
|
| Xpress-E14A |
E14A with Xpress
3 key electronic controller (SHIPS
Truck) |
$1350 |
$1225 + free ship |
|
| Furniture Kit for E14
models (1x 12"x12"x5/8" shelf, 4x 1/2" posts, 1 lb bag
glass separator) |
$52 |
$52 |
|
| Single Shelf (12"
x 12" x 5/8") C12 |
$39 |
$39 |
|
|
Options |
E / Q
Sentry upgrade |
Upgrade any of the Xpress E or Q kilns to the
Sentry 12
key controller (may require additional truck shipping charges) |
$200 |
$180 |
|
| Custom Color |
Purple, Hot Pink, Turquoise or Black.
(Note: This may delay your shipment.) |
$50 |
$45 |
|
|
1" x 3" Glass
Window (see
image) E and Q Series Kilns. The
high-temperature glass window is guaranteed up to 2300°F.
Q11 and E9 window is 1"x3". E12, E10,
E14 is 2"x2" (1"x3" when ordered with a bead
door).
(Note: always wear firing safety
glasses when viewing the kiln interior.) |
$60 |
$50 |
|
E
series Bead Door (see image) Adding the optional 2 1/2” x 6 1/2” bead door
to your E-series is like buying two kilns instead of one. Not only can you
fire enameling, glass, and ceramics, but with the bead door you can also
anneal glass beads. (Not available for Q11 kiln) |
$50 |
$40 |
|
|
|
Paragon J14 Front Load Fiber Kilns (X14J)
J14 with infinite controls
|
A front-load kiln popular for jewelry, china painting and
enameling. The J-14 is often used
for
heating jewelry molds. The kiln is made of ceramic fiber
for fast heating and cooling. It has an infinite control
switch and operates on 120 volts. Maximum temperature is 1700°
F. (Also available in 240v models; J14-2)
The J-14 comes with a built-in
thermocouple (temperature sensor). An attachment block is
mounted on the back of the kiln for easy hookup to a pyrometer
or portable TnF 2 controller.
The firing chamber is a one-piece
ceramic fiber shell with embedded elements. For greater
thermal efficiency, the space between the steel case and the
ceramic fiber shell is filled with extra ceramic fiber
insulation.
The J-14 comes with a vent hole and
steel cover in the top and door. The door seals tightly
with a heavy spring latch. The controls, located in the
base, stay cool for long life. No extra stand is
needed. The J-14 is available with an optional wax
tray for lost wax casting. The J kilns do not have
elements in the lid. |
|
| Model |
Type |
List Price |
Our Price |
|
| J14-1 |
J14, with infinite controls, 120v Read
about kiln controls |
$1250 |
$1139 + free ship |
|
| J14-2 |
J14, with infinite controls, 240v Read
about kiln controls |
$1250 |
$1139 + free ship |
|
| Xpr-J14-1 |
J14, with 3 key electronic
controller, 120 |
$1505 |
$1273
+ free ship |
|
| Xpr-J14-2 |
J14, with 3 key electronic
controller, 240v |
$1505 |
$1273
+ free ship |
|
| TnF-J14-1 |
J14, with TnF
Sentry 2.0 electronic controller, 120v Read
about kiln controls |
$1865 |
$1569 + free ship |
|
| TnF-J14-2 |
J14, with TnF
Sentry 2.0 electronic controller, 240v |
$1865 |
$1569 + free ship |
|
Furniture Kit for J14
models
(1x 12"x12"x5/8" shelf, 4x 1/2" posts, 1 lb bag
glass separator) |
$52 |
$52 |
|
| Single Shelf (12"
x 12" x 5/8") C12 |
$39 |
$39 |
|
12" x 12" Stainless steel
Wax tray option |
$37 |
$37 |
|
Paragon F120 & F130 Annealing
Kilns
|
F120
|
Anneal large glass figurines in the
digital F-120 and F-130 lamp working and annealing kilns. Raise
the spring-loaded vertical-drop door to insert a glass figurine
with a punty rod. Lower the door. The punty rod extends outside
the firing chamber through the smaller punty rod door. This
allows the glass to anneal safely.
You can make objects up to 5” tall
in the F-120, and 11" tall in the F-130. Maintain the
annealing temperature indefinitely with the Sentry Xpress 3-key
controller.
The Sentry Xpress 3-key controller is
packed with features. It includes two modes: Single Speed and
8-segment Ramp-Hold.
Ease of operation will delight you.
Never before has lamp work been so easy in this price range.
Imagine the massive, award-winning figurines you will be able to
make with this kiln.
The F-series lid elements use a new
element groove that eliminates element pins. The element coils
are wider than the groove opening, so the elements stay in place
without pins. The element is mounted in the top of the kiln for
safety. There is no sidewall element to touch with a punty rod.
With the element in the top, you can also fuse and slump glass. |
|
| Model |
Type |
List Price |
Our Price |
|
| F120 |
Lamp working/Annealing Kiln 120v electronic
Read
about kiln controls |
$1350 |
$1219 + free ship |
|
| F130 Elite |
Lamp working/Annealing Kiln 120v electronic
Read
about kiln controls |
$1450 |
$1299 + free ship |
|
| Furniture Kit for
F120 / F130 |
$43 |
$43 |
|
| * We generally only ship kiln shelves when purchased with kilns, not
by themselves. They are difficult to ship without breaking, and
should be truck shipped which costs a lot relative to the cost of the
shelves. Sometimes small shelves can be shipped UPS but there are
packing charges. If you really need shelves but aren't ordering a
kiln, please email us for
a quote. Thanks |
|
