Small
120v kilns - USUALLY IN STOCK
Good for glass firing, enameling, china painting, some for low fire
and some for high fire ceramics. |
 |
Multi-purpose: For all Ceramics, Glass,
Enameling, Silver Clay, Decals, China Paint
Paragon Caldera S,
8" x 8" x 6.75" deep with infinite switch and pyrometer. Furniture Kit
and Bead Collar also in stock. Paragon Caldera,
Digital Controls 8" x 8" x 6.75" deep
Furniture Kit
and Bead Collar also in stock. Now also available with a
window. Also the smaller FireFly Kiln |
 |
Multi-purpose: For Glass, Enameling, Silver
Clay, Decals, China Paint, low-fire ceramics Paragon SC2, SC2
with Bead Door, SC2 with window, SC2 with bead door and window Electronic kilns, 8" w x 5.75" h x 7.75" deep
Paragon SC3, SC3 with Bead Door, SC3
with window, Electronic
kiln, 7.5" w x 7.75" h x 7.75" deep |
|
Paragon Q11A with
pyrometer
This is a popular kiln for glass sculpture, glass bead
annealing and glass crucible work. Xpress
electronic models are preferred
for silver clay since the silver requires a temperature hold. Unlatch and open the door with one
hand. Base stays cool during operation and no stand is
needed. Easy to replace elements. All models include
a door vent hole with steel cover.
|
 |
Paragon BlueBird New
wide annealing kiln. It is a digital front-loader with two 10” wide x 2 3/4”
doors. The kiln anneals glass beads and figurines to relieve
stress during cooling. The element is in the roof and seated in pin-less grooves.
The
8-segment Sentry Xpress version 4 digital controller is standard. Also
the new BlueBird XL |
|
Paragon EZ
Beader The EZ Beader with 3-key digital controller and the EZ
Beader-S with infinite control switch and pyrometer. The
digital EZ Beader can be programmed to maintain the annealing
temperature and to cool at a specific rate. The EZ Beader is 11"
wide, 4.25" high, and 7" deep. The heating
element is mounted in the top. Two 2.5" tall,
5.5" wide doors give a total of 11” width for inserting
bead rods. |
|
 | Olympic Hot Box Kilns (several
sizes and controller types in stock or available to ship within a few
days. |
| Most to Cone 10, so they get hot enough to fire anything. HB64
electronic and kiln sitter/timer in stock. HB86 electronic and
kiln sitter/timer in stock. HB89 electronic. |
|
|
| Olympic 1214E electronic
kiln |
| This is the largest kiln that you can get for a 120v circuit.
11" diameter by 13.5" deep. Cone 4, great for low fire
ceramics |
|
 |
|
 |
|
|
120v
/ 240v Glass Fusing
Kiln - USUALLY IN STOCK
Good for glass slumping and fusing. Some even fire
ceramics!
|
|
These are designed to fire both
glass and pottery. They have heating elements in the top and
sides. Special ceramic fiber paper covers the top element
to help prevent dust from falling onto the glass. The sidewall
elements are seated in dropped, recessed grooves. Paragon Janus 1613 16 1/2” wide x 13 1/4” deep
Paragon Janus 23 22 1/2” wide and 20 1/4” deep
Paragon Janus 27 28” wide (12 sided) and 22 1/4” deep
Sale! Now even lower prices! |
|
Olympic 146GFETLC Glass Fusing Kiln, 120
volts Elements in lid and sides. Separate switch for lid
element. 100% power flows to either the wall or lid
elements depending upon which one is activated. 1700 degrees F.
These are the same as the kilns below but with a clamshell
opening. Because of the design, they require truck
shipping and crating. |
|
Olympic 146
Glass Fusing Kiln, 120
volts Elements in lid and sides. Separate switch for lid
element. 100% power flows to either the wall or lid
elements depending upon which one is activated. 1700 degrees F.
These are the same as the kiln above but without a clamshell
opening. Also 146GFE
Square model and a 126GFE
model.. |
|
Olympic Oval Glass Kiln. Elements in lid and sides. Separate switch for lid
element (see mode switch description at top of page). 1700 degrees F.
Available as top or clamshell loading.
Olympic 259 25" x 37" x 9"deep
Olympic 2514
25" x 37" x 13.5"deep |
|
Paragon Fusion kilns have Digital Sentry Xpress
electronic controller (recommended for firing glass). Paragon glass kilns have been improved with the introduction
of the ball groove for the elements in the lid. This
eliminated the need for pins in the lids.
Paragon Fusion 7 Glass Kiln 17.5" octagon x 11" deep
Paragon Fusion 8 Glass Kiln 17.5" octagon x 11" deep
Paragon Fusion 10 Glass Kiln 23.5" decagon x 11"
deep |
|
240v Medium Sized Ceramic Kilns
- IN STOCK
Good for firing ceramics, most up to cone 10 |
|
See Paragon Janus kilns
above (ceramic and glass kilns) |
 |
Olympic 23"
Raku Propane Kiln
17.5" octagon x 22.5" deep,
240 volts, 26 amps, Cone 8
|
 |
Olympic 18" Electric Raku
Kiln (pickup in Sparks, Nevada for only $1225)
17.5" octagon x 22.5" deep,
240 volts, 26 amps, Cone 8
Reaches temperature in 2-3 hours. Chamber holds temperature for
fast turn around. Equipped with an Electronic controller |
|
L&L Liberty Belle
2.5 cubic feet 16.5" diam x18" d
Plugs into a 30 amp Dryer Outlet with a 12 foot long cord for
easy installation! Cone 10 5737 watts
Comes apart in sections for easy set up. True Cone 10 Operation with Fast heat up.
Simple 3 button automatic control, includes 4 programs, each
with 8 segments. Durable professional grade construction, includes L&L's
ceramic element holders. Complete visual instruction manual.
3 year limited warranty! |
 |
Wow! Standard Zone control, ceramic element holders, thermocouple protection tubes,
easy open hinge, heavy duty elements, electronic
controller,
L&L easy-Fire e18S and e18S-3
L&L easy-Fire e23s-3
22.3" dia x 27"
deep.
L&L easy-Fire e23T-3
22.3" dia x 27"
deep. |
 |
Skutt KM1018, KM1027,
KM1027-3, KM1227-3
23" dia x 2" deep
|
| 240v
Large Sized Ceramic Kilns
- IN STOCK |
 |
L&L e28T Cone 8 at 240v, Cone for 5 208v model
(240v 3 phase and 208v 3 phase models are Cone 10) 28" diameter x 27" deep (inside)
3" brick, 10.2 cubic feet
|
