Bluebird XL Door
The BlueBird XL now comes with two types of doors: a 10” x 4” short door and a 10” x 4 1/4” tall door.
The 10” x 4” short door has a 1/2” gap under the door and includes a double mandrel holder. Place bead rods on the mandrel holder, which cradles the rods at two points.
Because of the gap, the door remains closed even with bead mandrels in the kiln. Adjust the height of the mandrel holder by loosening screws underneath.
The bottom of the 10” x 4 1/4” tall door, in the closed position, is flush against the kiln floor. An adjustable bead mandrel holder supports the bead mandrels at a single point.
The standard BlueBird XL comes with a short door on the left and tall door on the right. You can order your kiln with two short doors or two tall
doors, but you will need to tell us in the order comments or you will get the standard configuration. The doors are interchangeable, so you can reverse the doors of a standard BlueBird XL
later (left to right). |
|