We carry Jiffy Mixers and Hansen Mixers, all
at 10% off every day!
|
|
Jiffy Mixers
Stainless Steel Wand by Jiffy Mixer. Made of Stainless
Steel. No splashing or sucking air. Cuts mixing time up to
90%. Works with electric and air driver power drills. Best
when used at 450-700 rpm's. Great for mixing glazes, slips,
plaster and more!
| Model |
Shaft length
(in) |
Min
Drill
size (shaft dia) |
Container size
(gal) |
Maximum Diameter (larger
models taper slightly) |
Price
|
Buy |
| LM |
10-1/4 |
1/4" |
Pint |
1-1/4" |
$11.40
$10.26
|
|
| HS-2 |
14-3/4 |
1/4" |
1-2 |
2-5/8" |
$14.65
13.19
|
|
| HS-3 |
30 |
1/4" |
1-2 |
2-5/8" |
$17.65
$15.89
|
|
| ES |
20-1/2 |
3/8" |
2-5 |
3-3/4" |
$45.35
40.82
|
|
| PS-1 |
20-1/2 |
1/2" |
5-10 |
5-1/8" |
$49.95
44.96
|
|
| PS-2 |
40 |
1/2" |
10-50 |
5-1/8" |
$61.45
55.31
|
|
|
Hansen Mixers
The Hanson plunge mixer is the top of the line heavy-duty mixer now
recognized by many companies as the best mixer to mix products with a
minimum of air entrapment. Will mix paints, glues, epoxies,
urethanes, glazes, printing inks, fiberglass, plastic compounds,
plaster, mortar, cement, molding sands, asphalt sealers.
Made from
a zinc-aluminum alloy, with heavier zinc content for durability and
longer life. Head is cast, tumbled smooth with a no burr finish
for easy clean up. Has been designed to reach the bottom of
settled materials.
 |
001 is similar to Jiffy LM |
|
002 is similar to Jiffy HS1 |
|
003 and 3A are similar to Jiffy ES (3A has a thicker shaft so is
stronger, but requires a 1/2" drill chuck, which not everyone
has.) |
|
 |
| Model |
Head Height |
Head Diameter |
Length
(in) |
Min
Drill
size |
Container size
(gal) |
Price
|
Buy |
| 001 |
1.375" |
1.25" |
9 |
1/4" |
Pint/
Quart |
$10.29
$9.26
|
|
| 002 |
1.875" |
2.25" |
13 |
5/16" |
1-2 |
$14.70
$13.23
|
|
| 003 |
3" |
3.18" |
17 |
5/16" |
2-5 |
$19.43
$17.49
|
|
| 003A |
3" |
3.18" |
22 |
1/2" |
2-5 |
$23.63
$21.27
|
|
|
Hansen Specialty Mixers
085W: Mud Mixer for Drywall: Designed to mix paints, drywall mud, and
heavy paste. Reaches into the corners of mixing containers for
less product waste. Has a detachable blade design for easy
clean-up. For 5 gallon containers. Aluminum allow with hex
steel shaft. Smooth tumbled finish. Note: This would be a
good mixer for mixing slip. The hex shaft is particularly good for
mixing thick liquids.
ST2: This mixer mixes in a quick hurricane action. 2 mixing heads
mix faster. For mixing fluid materials (such as glaze) in 5 gallon
containers. Aluminum.
|
T5 in use
|
T5: The Hanson Swing T-Mixer. Many materials come in a sealed 5
gallon container with a pouring spout. With the Swing T-Mixer you
put the mixer through the opening where it opens to a 5" mixing
diameter when centrifugal force from the drill is applied. Teeth
on the bottom for added mixing action and the ability to loosen material
from the bottom of the mixes without harming the container.
Aluminum.
|
085
ST2
T5
|
| Model |
Head Height |
Head Diameter |
Length
(in) |
Min
Drill
size |
Container size
(gal) |
Price
|
Buy |
| 085 |
5.5" |
7.5" |
24 |
3/8"
hex |
5
gallon |
$13.13
$11.82
|
|
| ST2 |
1.125" |
3.75" |
20 |
5/16" |
5
gallons |
$13.55
$12.20
|
|
| T5 |
3.5 |
|
23 |
3/8" |
through
5 gallon pour spout |
$32.03
$28.83
|
|
|
|
