Join us in being socially and environmentally responsible and moving our industry toward a world safe for our children and future generations.
Introducing, pure•brilliance™ the FIRST high-performance nontoxic clear glaze ever.
You want a clear glaze that is forgiving, gives you a brilliant shine, one with a fast and stable dry time, one that enhances underglaze colors, it must be craze resistant and most of all, it must be easy to use.
Plain and simple, pure•brilliance™ says it all and does it all!
Application:
Brush-on glaze
1. Mix well. 2. Apply 2 coats to shelf cone 04 bisque.
3. Fire to shelf cone 06. Water cleanup.
Dipping glaze
1. Initially mix with electric mixer for no more than 2 minutes. A stainless steel wire whisk can be used to stir glaze periodically.
2. Submerge a Viscosity Cup into tank and fill with glaze. As you lift cup from glaze, begin timing. Stop timing when stream of glaze begins to break. A range of 19-24 seconds is normal. Add small amounts of water as needed. (4 oz at a time)
3. Hold ware with hands or dipping tongs. If using hands, wear protective gloves. As you remove ware shake away any drips or runs. Do not finger sand to prevent airborne dust.
4. If necessary on larger piece, dip unglazed portion, slightly overlapping glazed area for full coverage. Let dry.
5. Use a Fan Glaze Brush to touch up any missed areas after ware dries.
Use a Palette Knife to shave off drips or runs to prevent airborne dust.
6. Set ware securely on clean, sharp kiln stilts in kiln. Fire to shelf cone 06.
